How To Add Zmodo Wireless Camera

If your Zmodo camera won't connect to WiFi, then follow this guide to fix the issue quickly. Yous demand to fix this trouble every bit soon as possible because the Zmodo camera needs WiFi to get the alive stream, motility detection, and other phone alerts.

To gear up a Zmodo camera not connecting to WiFi, you should make sure the WiFi connexion works and meets all the requirements. Almost of the time, the event is related to the frequency that the camera is using, more than specifically the router's WiFi may be operating at 2.4Ghz and 5Ghz and the camera is trying to connect to the wrong SSID.

In other words, the photographic camera is operating on 2.4Ghz frequency just it's connecting to the 5Ghz SSID (which is the wireless proper noun). Follow the troubleshooting tips below to fix the issue.

Zmodo camera can't connect to the internet (WiFi)

In 90% of the cases, this problem with the Zmodo camera happens if you are using a dual-band router. That means the router offers two WiFi signals, 2.4Ghz, and 5Ghz. Your photographic camera may only exist able to connect to ii.4Ghz and not 5Ghz (or vice versa), so it can get stuck attempting to connect to both frequencies of your dual-band router.

To gear up the event of the Zmodo photographic camera not connecting to the internet only rename the split SSDI's (WiFi name) so you can differentiate betwixt them. Follow the steps.

• Access your router settings (commonly by typing the IP accost of the router on the web browser and log in with your username/countersign).
• Locate the WiFi bill of fare.
• If your router is dual-ring, you should run into ii WiFi names at that place (ane is two.4Ghz, the other 1 is 5Ghz). Rename each of the SSID using different names. For example, rename the first one "MyWiFi2.4" and the other one "MyWiFi5".
• Salvage the settings. Additionally, brand sure your router is using the WPA or WPA2 for the encryption style.

Let'due south assume that yous have a Zmodo camera that works on 2.4Ghz only. Since nosotros renamed both WiFi names of the router, you lot can connect the camera straight to the ii.4Ghz signal which to a higher place we renamed as "MyWiFi2.4". Connect to it and the camera will start to piece of work, no more failed connection.

Zmodo camera doesn't take the WiFi countersign

Here's an result with some of the Zmodo cameras: they don't accept WiFi passwords that are more than 13 characters long. Permit's say your WiFi countersign contains xx characters, if yous enter it on the Zmodo photographic camera app, it won't connect.

Information technology's a weird consequence just it happens. The newer Zmodo models have this problem fixed, just not some of their photographic camera models. There's no gear up for this, all yous have to practise is to change the password of your WiFi and use 1 that contains less than 13 characters.

Troubleshoot the WiFi setup (of Zmodo cameras)

Check if the WiFi signal is working in the first place. Perchance the camera can't connect because the WiFi doesn't work at all. Try to connect to the WiFi using your phone, or a computer, or any other device just to ensure that the internet works.

If it seems that the other devices connect fine to the internet, then reboot the router and endeavour again. Sometimes rebooting a device can do wonders.

Next check the WiFi strength, the signal must be strong to cover your Zmodo camera. At the same time, make sure the camera is not far abroad from the router and that information technology'south within the nominal coverage. Yous can bring the camera closer merely to see if information technology connects.

A few tips on how to cheque the WiFi signal force:

• Check the WiFi symbol on your phone or tablet, it'south displayed on the corner of the screen, and make sure all the bars are filled. The more bars, the stronger the internet.
• Download apps as NetSpot, WiFi Analyzer, or Wireshark to test out the WiFi signal's strength.

For some smartphones, you will demand to disable your 3G/4G LTE information connection during setup. One time you have configured your device, you lot can re-enable your 3G/4G LTE data connectedness.

If the Status Light is blinking green on the camera, endeavour removing special characters and spaces from the SSID (WiFi network proper noun) like "?" or "!". Also, make sure the app and the camera are updated to the latest firmware versions.

If the WiFi is okay but you're notwithstanding having bug, follow the steps below to troubleshoot your router for the SmartLink setup.

• Admission your wireless router settings.
• Find the tab or settings for the Wireless.
• Find the selection called Wireless Network Mode.
• Set up the wireless network mode of your 2.4GHz wireless network to 802.11b simply, 802.11g merely, or 802.11b/g just.
• Retry the SmartLink setup (or any Zmodo phone app that y'all're using) from your smartphone while connecting to this network.
• After the phone app successfully connects your wireless device to the WiFi network, you tin modify your settings back to their original value. The wireless device will automatically connect to your network.

Conclusion

Zmodo photographic camera non connecting to the WiFi is nearly of the time related to dual-band routers and you need to rename the WiFi names for ii.4Ghz and 5Ghz. That fashion the camera will differentiate both signals and correct them to the correct one. Go out a comment if you can't solve the problem, or contact the manufacturer.

Source: https://securitycamcenter.com/zmodo-wont-connect-to-wifi-fix/

Posted by: ginngrens1986.blogspot.com

Share this post